Typically, extreme weather conditions can cause severe damage to your pool, costing you some dollars to fix. Homeowners must know the difference between typical pool problems and those caused by extreme conditions. The following piece will discuss seven ways to prepare your pool for extreme weather events.
1. Plan Ahead
Ensure that your pool is properly engineered and built to withstand severe weather conditions such as freezing temperatures or heavy rains. When building a pool, it’s always best to hire experienced professionals in designing and building pools. You may even want to consider hiring professionals for pool services before construction begins, so you know what you’re getting into with your investment.
2. Rainy Days
Rainstorms often lead to broken-down pumps. Therefore, it’s essential to check your equipment regularly and replace worn parts as soon as possible. Always remember to clean out electrical contacts when repairing.
Also, make sure that there isn’t too much water sitting in your pool. Water levels above 1/4 inch can cause mold issues inside the pool liner. There may be times when high winds cause water spray to enter the interior walls of your pool.
To prevent this from happening, have your drains cleaned every few years. Also, make sure to look for pool services to help you drain water out of your pool if you anticipate rain.
3. High Winds
High winds can easily blow leaves into your pool, causing significant damage. Leaves must be removed immediately using a leaf blower.
In addition, make sure that you have a strong fence around your pool to protect against flying debris. High winds also pose a threat to swimming pools. If the wind hits your collection at the right angle, waves will form in the shallow end.
These waves can quickly rise and knock people out of their lounge chairs. Remember, the depth of your pool determines whether or not it will withstand a forceful wave. We recommend hiring a reputable company in Bonita Springs, Florida, for best results with pool care services.
Following are several things that you might need to do before a storm:
1. Trim Trees Around the Pool Area
Typically, trees will fall into pools when it rains or snows heavily during the winter months. This leaves unsightly tree debris all over the ground around an open pool. It is essential to trim these branches to not hit the pool walls or cause damage.
You also want to cut any limbs close enough to fall in the pool area at home. This way, you avoid having them break off inside the house.
2. Turn Off Your Pool Equipment
If you noticed that your pool equipment was turned on while there were storms in the forecast, turn them off immediately. An electrical short or a power outage caused the machine to keep operating. Also, if you have automatic controllers, turn them completely off. These devices do not work well with fluctuating temperatures.
3. Check the Filter System
Make sure that the filter system is working correctly. Some filters need to run every day, even in the warmer months. A malfunctioning filter can affect the chemical balance in your pool.
4. Don’t Empty Your Pool
You might think emptying your pool would help clear away rainwater and snow, but draining your pool causes your pool pump to operate more often than needed. When there is a lot of extra water flowing through your pipes and pumps, they get clogged up and stop functioning. Once this happens, you have no choice but to call for pool service.
Final Thoughts
The above tips will help ensure you’re prepared for extreme weather conditions in Bonita Springs, Florida. By taking these precautions, you won’t have to worry about losing control of your pool during severe weather events such as hurricanes, earthquakes, tornadoes, etc.
